• 687 07 Tupesy, CZ

Belt conveyor type STDJ

as well as the type STD – is produced in various belt widths: 500, 650, 800 and 1.000 mm. The structure is made of tubes diam. 57×3,2mm and the structure height is 800 mm that makes it different from type STD. This type of belt conveyor could be used in all branches (industry of building materials, sand pits, gravel pits, crushing plants, recycling, etc.)
The maximal length is 60 meters and maximal output is limited by 45 kW.
The conveyors STDA could be delivered following accessory equipments:

    • Gangway with galvanized grills 600 mm wide
    • Gallery
    • Feeding hoppers, discharging chutes, side guidance
    • Covering systemChassis
    • Safety equipment
    BB 500 650 800 1000
    GA 800 950 1150 1350
    GB 890 1040 1240 1440

    STDJ in use

    Type STDA is used for example in stone pit in Beograd (Serbian), in sand pits near to Leipzig   (Germany).or Nantes (France)
    Some of supports (in the pictures) reach the height of 18 meters.
    Click the picture to enlarge

     

    Tube structure: tubes Ø 57 x 3,2 mm
    Maximal length of belt conveyor (AA): max. 60 m
    Belt width (BB): 500, 650, 800 a 1000 mm
    Driving motion: helical-bevel geared motors
    SEW, Stiebel, Nord
    Driving pulley: Ø 400 mm, Ø 500 mm
    Maximal output: max. 45 kW
    Rollers: Ø 89 mm, Ø108 mm
    Rubber belt: EP 400/3 4+2, EP 500/3 5+2, EP 630/4 6+2
    Dunlop, Sava, Matador
    Feeding hopper: 2000 mm long
    Capacity: BB = 500 mm ~100 m3/h
    BB = 650 mm ~ 180 m3/h
    BB = 800 mm ~ 290 m3/h
    BB = 1000 mm ~ 470 m3/h
    Accessories: gangway with galvanized grills 600 mm wide, gallery, feeding hopper, discharging chute, covering, supports, chassis, pivot, emergency stop, etc.